To reset a Vivitar drone, turn it off, press the reset button (if it has one), then turn it back on and pair it with the remote again.
Table of Contents
Key Takeaways
- Power Off The Drone: Turn off the Vivitar drone completely before resetting.
- Recalibrate: Use a flat surface and follow your model’s manual to calibrate the drone correctly.
- Reconnect The Controller: Pair the remote again to ensure proper signal transmission.
How Should You Prepare To Reset Your Vivitar Drone?
Make sure the drone and remote are fully charged, place the drone on a flat surface, and remove any extra parts before starting the reset.
Ensure Your Drone Battery Is Fully Charged
Before starting the reset, charge the drone battery completely. A low battery can interrupt the process or cause further issues.
Turn Off The Drone Before Resetting
Press and hold the power button to shut off the drone entirely. Disconnect the battery or power source if possible. This prevents signal interference during the reset.
Place Your Drone On A Flat Surface
Level surfaces allow internal sensors to calibrate properly. Avoid tilted or uneven surfaces to prevent drift or balance problems after reset.
Check The Remote Battery
Yes. A weak remote battery can stop the reset or re-pairing from working. Fully charge the remote before continuing.
Disconnect External Devices
Remove extra parts like cameras or prop guards. This prevents conflicts during the reset. Reattach them once everything is working.
What Are The Steps To Reset Your Vivitar Drone?
Turn off the drone and remote, press the reset button if there is one, then turn them back on and pair them again, followed by recalibrating the drone.
Step 1: Power Off The Drone Properly
- Press and hold the power button until all lights turn off.
- Unplug the battery or turn off the power switch if applicable.
- Wait at least 15 seconds to let internal components reset.
Step 2: Reset The Remote Control
- Turn off the remote.
- Press the reset button (if available) for 5–10 seconds.
- This clears old settings and prepares it for fresh pairing.
Step 3: Re-Pair The Drone And Remote
- Turn both the drone and the remote on.
- Follow the pairing instructions in your manual. Typically, this involves pressing a sync or pair button.
- Watch for blinking lights becoming steady—this confirms the connection.
Step 4: Recalibrate The Vivitar Drone
- Enter calibration mode (via button combo or app, depending on the model).
- Follow on-screen or manual-based steps.
- Test for balance and responsiveness during a short test flight.
This process works for most models, including Vivitar SkyView, AeroView, and DRC-888. When you need help with a specific version, consult the manual.
How Do You Troubleshoot If Your Vivitar Drone Still Isn’t Working?
Check the battery, make sure the drone and remote are paired, update the app or firmware, and reset the drone again if needed.
Is Your Drone Not Connecting To The Remote?
When your Vivitar drone is not connecting to the remote, repeat the pairing steps and check the LED light indicators. Try a different location to avoid signal interference.
Are The Flight Controls Unresponsive?
Test the joysticks during a short hover. When movements lag or drift occur, recalibrate again on a flat surface.
Are There Software Errors?
Watch your screen or app for error messages. Update the firmware if prompted.
Should You Update The Firmware Again?
Yes, especially when the drone shows inconsistent behavior. Use the official app for your model (e.g., SkyView or AeroView) and follow firmware update instructions.
When Should You Contact Vivitar Support?
When problems continue after reset and firmware updates, reach out to Vivitar customer support. They can help with hardware issues or advanced troubleshooting for your specific model.
How Can You Prevent Future Reset Issues?
Keep the drone and remote charged, update the firmware regularly, and don’t fly in bad weather to avoid problems.
Regularly Update The Firmware
Firmware fixes bugs, adds features, and improves performance. Always keep it current.
Battery Maintenance Is Important
Keep both the drone and remote batteries fully charged. Avoid flying on low battery, which can lead to disconnection or crashes.
Weather Can Affect Drone Performance
Avoid flying in wind, rain, or snow. Harsh weather can cause balance and sensor issues that can force a reset later.
Frequently Asked Questions
1. Will Resetting My Vivitar Drone Delete Flight Logs?
No. Flight data is typically stored in your app or controller, not the drone.
2. Will A Reset Fix Battery Issues?
Yes. It will fix software-related battery issues, but not physical battery problems. Replace damaged batteries if needed.
3. Can I Reset The Drone Via The Vivitar App?
No. The reset must be done manually using buttons or remote steps. The app is only used for firmware and flight settings.
Final Thoughts
Knowing how to reset Vivitar drones is essential for solving common issues. For example, unresponsive controls, failed calibration, or weak remote pairing. Follow the step-by-step process above. This includes power-down, re-pairing, and calibration. Thus, you can restore your drone to smooth working condition.
For long-term performance, keep your firmware updated, batteries healthy, and flights limited to safe weather. With good care, you’ll reduce the need for future resets and enjoy trouble-free flying.
